By buying this product you can collect up to 99 loyalty points. Your cart will total 99 points that can be converted into a voucher of $0.99.
The Kick from Smok is a power booster for mechanical mods.
Warning: Last items in stock!
The Kick from Smok is a power booster for mechanical mods. It is a drop in module designed to be used in various metal tube mods that use IMR batteries. It works in mods that would usally take an 18650 battery (max internal diameter of 19.5mm) and with The Kick installed instead use an 18500/ 18490 IMR battery. It can also be used in 18500 sized tube devices (max internal diameter of 19.5mm) with an IMR 18350 batter. The Kick is designed to take a standart 3.7V battery and boost its power. The Kick's Power Regulation microprocessor automatically adjust the volt and amp levels when needed providing a consistent wattage output.
The Kick gives you numerous options such as: increasing the power to the cartomizer or clearomizer you are currently using, or allowing you to use a higher resistance cartomizer or clearomizer. It has also has built in safety features such as a low voltage cut off system which disables the mod from working if the battery volts drop below 3.2V, a low resistance cut off for when the output resistances is lower than 1.0ohms, reverse battery shut off, and over heating protection.
It has a variable power of 5W to 12W, this can be adjusted by using a small Philips screw driver once the battery has been dropped into the mod tube (wattage is clearly marked). The Kick should be placed atop the positive terminal of your IMR Battery with the adjustment dial facing up.Once a user finds their peferred wattage output, the Kick is more of a set it and forget it design.
The Kick can fit all Sigelei Mechanical Telescopic Mods other than #1, #9 and #11.
- 1 x The Kick by Smok
Warranty: Please refer to our Warranty page for details.
The new Omnitester for Smok allows you to easily test the resistance of your 510 or eGo threaded clearomizers as well as the voltage of your 510, including modulated output devices. This versitile device also allows you can also attach an atomizer and a device at the same time to test its voltage under load.
The LiPo Guard is a fire retardent bag that is designed to contain and prevent fire caused by faulty or incorrectly charging batteries. They are the best way of protecting your charging batteries from major damage. These bags are also ideal for storage and transport.