Innokin iTaste VV V3.0 Express Kit

By buying this product you can collect up to 174 loyalty points. Your cart will total 174 points that can be converted into a voucher of $1.74.


The iTaste VV V3.0 is a microprocessor controlled variable-voltage/variable-wattage (VV/VW) personal vaporiser that lets you adjust the voltage or wattage in seconds with just a few button presses.

More details


More info

Innokin iTaste VV V3.0 Express Kit

The iTaste VV V3.0 has paved the way in electronic cigarette innovation. The elegant vaping device comes with a feature rich list of improvements which includes: variable wattage, variable voltage, a resistance checker, a puff counter and a mirror finish LED display. This smart, easy to use, square designed device truly presents a whole new approach to vaping. This versatile battery is 510 threaded, meaning it can be connected to clearomizers such as the iClear 16 and 30, Vivi Novas, and Kanger tanks.  


- Variable Voltage: The iTaste VV V3.0's voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.

- Variable Wattage: The iTaste VV V3.0's wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.

- Ohms meter: The iTaste VV V3.O automatically detects load (auto ohms checker).

- Puff Counter: The puff counter will record how many puffs you have taken. The puff counter is cleared every time the device is turned off.

- Short Circuit/Atomizer Protection: Short Circuit Clearomizer Protections helps protect the iTaste VV against faulty atomizers. If a defect clearomizer is detected, the iTaste VV V3.0 will not work, a feature which can prevent possible battery damage.

- Over-Discharge Protection: The iTaste VV monitors the battery voltage and will automatically turn off when the battery is full. 

- LED Battery Indicator: The iTaste VV battery utilises an advanced capacity display. Through the use of the colour activation trigger, the battery's current state of charge is replayed. The LED light will glow green for full battery capacity, yellow for half capacity, and red when charging is needed. 

- Superior Battery Life: The iTaste VV has a built-in 800 mAh polymer Li-Ion rechargeable battery. 

- 510 Threaded:The iTaste VV is threaded to accept 510 accessories, including the iClear10, iClear16 and iClear30 clearomizers.

- ON/OFF Battery Switch: Quickly clicking the iTaste VV V3.0 fire button three times will power the device on or off. Once the device is on, holding down the button will activate the battery and allow you to start vaping. The ON/OFF safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes.

- 10-Second Cutoff: If the button is held down for 10 seconds or longer, the iTaste VV will shut itself off until the button is released. This helps to prevent the device from overheating.

- Pass-through: The iTaste VV is charged through a Micro USB Port. You can recharge it with any standard Micro USB cable. It can also work as a pass-through device for simultaneous vaping and charging.

- Display Information: The bright LED display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.

Package includes:

- 1 x Innokin iTaste VV V3.0 800mAh Polymer Li-ion Intelligent Rechargeable Battery

- 1 x iTast USB Retractable Cable

- 1 x Instruction Manual

- 1 x Acrylic Box

The Innokin iTaste VV V3.0 specifications:

Dimensions: 11cm L x 1.6cm

- Battery Capacity: 800mAh

- Operating Voltage: 3.3 V - 5.0 V 

- Operating Wattage: 6.0 W - 11.0 W 

- Charging Time: 1.5 Hours

- Maximum Current Output: 3.5 ampere

Additional Info:

Warranty: Please refer to our Warranty page for details.

Related Products

Customers who bought this product also bought: